An entrance mat is an assembly of profiles, inserts, frames and a supporting detail. These guides cover recess surveys, insert combinations, drainage, accessible transitions and the maintenance information needed to order replacements correctly.
Browse 32 productsSelect a recessed entrance mat against the finished recess depth, frame and surrounding floor levels. The mat's profile height is only one part of that fit.
Read guide: Entrance mat depth: measure the recess before selectingCompare mat inserts by the dirt and moisture conditions at the entrance. Brush, textile and rubber configurations should remain separate choices, even when their aluminium bases look similar.
Read guide: Brush, textile and rubber mat inserts: choose by entrance zoneAn outdoor entrance mat needs a coordinated drainage and supporting detail. Choosing an outdoor category does not remove the need to check the actual entrance conditions.
Read guide: Outdoor entrance mats: exposure, drainage and supportAn entrance mat should be reviewed as part of the whole walking route. The mat surface, frame, openings and surrounding levels all affect the transition through the doorway.
Read guide: Entrance mats and accessible floor transitionsFor a large entrance, plan mat sections around the recess dimensions and maintenance access. One overall opening measurement does not describe how the supplied sections will fit or be handled.
Read guide: Modular mat sections: plan size, joints and lifting accessMat-frame retrofit work starts with a survey of the existing floor, recess and threshold. The new frame should suit the substrate and final level rather than merely match the old outline.
Read guide: Retrofitting entrance mat frames into existing floorsWet-area walkway matting should be selected for its intended location, surface arrangement and maintenance. A loop mat or entrance mat should not be assumed to serve the same function.
Read guide: Wet-area walkway mats: compare construction and useMaintain the visible mat and the recess beneath it as separate cleaning tasks. Surface cleaning alone can leave accumulated dirt and moisture hidden below the assembly.
Read guide: Entrance mat maintenance: inserts, recesses and spare partsEntrance mat variants can share a base illustration while differing in inserts, depth or connection arrangement. Use the full product record to distinguish them before ordering.
Read guide: Reading entrance mat variants when images look alikeA complete entrance mat enquiry includes the recess survey, insert configuration and frame detail. Stating only length and width leaves important installation assumptions unresolved.
Read guide: Entrance mat RFQ: recess survey, inserts and installation scopeDoor clearance and mat recess measurements should be taken together. The selected mat, its frame and the supporting build-up need to fit beneath the operating door arrangement, not just inside an empty recess.
Read guide: Surveying Door Clearance Before Specifying Entrance MatsA cleaning access plan should explain how staff can reach the mat and its recess without creating an uncontrolled obstruction. It turns general maintenance advice into a practical procedure for the specific entrance.
Read guide: Planning Safe Access for Entrance Mat CleaningA curved or irregular mat area should be defined by an approved template or coordinated dimensioned drawing. A width and depth alone can miss the geometry that determines whether a custom assembly fits the finished entrance.
Read guide: Preparing Templates for Curved Entrance Mat AreasWhen a building opens in phases, entrance mat panels should be assigned to the areas and dates where they will be used. The delivery and installation plan needs to distinguish staged completion from the mat's physical panel arrangement.
Read guide: Dividing Large Entrance Mats into Manageable SectionsAn exterior mat recess needs a coordinated drainage interface. The mat surface and insert choice do not by themselves establish how water leaves the recess or how the entrance waterproofing remains continuous.
Read guide: Coordinating Entrance Mats with Exterior DrainageMat strip orientation should be decided on a plan and checked with a physical sample. It affects the visible layout and the way the assembly relates to the entrance route, without establishing performance from appearance alone.
Read guide: Setting the Orientation of Entrance Mat StripsAn occupied building needs a replacement plan that covers access, handling and reopening as well as the new mat. Working after hours reduces some disruption, but it does not remove the need for a coordinated sequence.
Read guide: Planning Entrance Mat Replacement in Occupied BuildingsThe mat border is a visible junction between the entrance assembly and the surrounding floor. Approve its section and finish with the adjoining materials instead of treating the border as an incidental accessory.
Read guide: Matching Entrance Mat Borders to Adjacent FinishesCustom mat deliveries should be checked against the signed manufacturing drawing before installation. Comparing only the mat's overall appearance can miss a reversed orientation, wrong section division or dimensional discrepancy.
Read guide: Checking Custom Mat Dimensions Before Site InstallationAn operations log turns entrance mat maintenance into a location-based record. It should show what was observed, what was done and what still requires attention, rather than only recording that the area was cleaned.
Read guide: Creating an Entrance Mat Inspection and Cleaning Log
